Professionalism Based on Methodical Work

The Wetrok cleaning methodology ensures that cleaning processes are worked off in the correct sequence and using the right machines and products for optimised results.


Removal of loose dirt Removal of adhering dirt Protective treatment Cleaning surfaces above the ground

Damp and wet wiping

Medium area performance: 400 m2/h

Removal of adhesive dirt with damp or wet cleaning textiles from all water-resistant surfaces above floor level

Damp wiping: direct method For low-level dirt

Wet wiping: Indirect method For heavy-duty dirt

Damp and wet wiping
Preparatory work

Add the cleaning product, correctly dosed, to the foamer dispenser.
Choose the right product for the surface and use the right dosage.

Fold the cleaning cloth.
Use proper folding techniques.

Main work involved A) Damp wiping

Spray/moisten the cleaning cloth with the cleaning foam/solution and wring it out thoroughly.
Pre-moistened disposable cloths can be used immediately.

Wipe the surface down with a folded cloth. Use proper folding techniques.

Leave the surface to try.

B) Wet wiping

Moisten the cleaning cloth with cleaning solution then wring it out.
Only use a suitable product.

Wet wipe the surface down with a folded cloth.
Use proper folding techniques.

Leave the cleaning solution to take effect.

Then use a new cloth to clear up the dirty water.

Leave any residual dampness to dry out.

Final steps

Wash any dirty cloths and clean the cleaning materials.
Throw away any disposable cloths.