Professionalism Based on Methodical Work

The Wetrok cleaning methodology ensures that cleaning processes are worked off in the correct sequence and using the right machines and products for optimised results.


Removal of loose dirt Removal of adhering dirt Protective treatment Cleaning surfaces above the ground

Wet mopping

Medium area performance: 250 m2/h

Manual removal of adhesive dirt from water-resistant floor coverings using mechanical/chemical means

Direct method: for low-level dirt Suitable for the Hopital system and for bucket unit/mop

Indirect method: for heavy-duty dirt.
Do not use on false floors! Suitable for bucket unit/mop

Wet mopping
Preparatory work

Add the cleaning solution, correctly dosed, to the bucket of water.
Choose the right product for the floor covering and use the right dosage.

Have enough mops ready.
Hopital system

Remove any loose dirt.
Dusting
Dry/brush vacuum cleaning

Put up the warning sign.

Main work involved A) Direct method

Wet mop the floor covering using a wrung out or already damp mop in one go.
Start by wet mopping the edges, corners, and under furniture, before cleaning the unobstructed areas in sweeping movements as you work your way towards the outlet.

B) Indirect method

First, use the mop to distribute the cleaning solution.
Start by wet mopping the edges, corners, and under furniture, before cleaning the unobstructed areas in sweeping movements as you work your way towards the outlet.

Leave the cleaning solution to take effect.
Do not allow to dry out.

Next, use a rinsed and thoroughly wrung out mop to clear up the dirty water.
Again, mop your way towards the outlet.

Final steps

Leave the floor to dry out.

Wipe the wet mopping unit down with a damp cloth and clean the cleaning materials.