Professionalism Based on Methodical Work

The Wetrok cleaning methodology ensures that cleaning processes are worked off in the correct sequence and using the right machines and products for optimised results.


Removal of loose dirt Removal of adhering dirt Protective treatment Cleaning surfaces above the ground

Disinfection

Medium area performance: 250 m2/h

Application of disinfectant to surfaces in order to kill pathogenic and harmful microorganisms

Follow the instructions relating to dosage and contact time!

Disinfection
Disinfection of surfaces/equipment: Preparatory work

Clean the surface/device thoroughly and leave to dry before disinfecting.
Damp and wet wiping
Foam cleaning

Use the right dosage for the disinfectant solution/choose a ready-to-use product.

Choose the right product for the surface and hygiene concept and use the right dosage.

Main work involved A) Larger areas

Moisten the cleaning cloth with disinfectant solution then wring it out.
Wipe the surface down with the wet cloth.
Damp and wet wiping

Ensure the surface/device is moist all over throughout the contact time.
Note the contact time! Rinse with water afterwards if necessary.

B) Smaller areas

Spray the surface/device with disinfectant until it is saturated.
Only use a suitable product.

Leave the surface to try.
Dying time = contact time

Final steps

Clean the cleaning materials.

Disinfection of floor coverings: Preparatory work

Add the disinfectant solution, correctly dosed, or the ready-to-use product to
the bucket of water.

Choose the right product for the surface and hygiene concept and use the right dosage.

Remove any loose dirt and put up a warning sign.
Dusting

Clean the floor covering thoroughly and leave to dry before disinfecting.
Wet Mopping
Scrub drying

Main work involved

Wet mop the floor covering using a wrung out or already damp mop.
Moisten the surface thoroughly and evenly.
Wet mopping

Ensure the surface is moist all over throughout the contact time.
Note the contact time! Do not walk on surface until dry.

Run over the surface once more with a thoroughly wrung out mop if necessary.

Final steps

Leave the floor to dry out.
Wipe the device down with a damp cloth and clean the cleaning materials.